Arrowheads can be classified and named according to the following three characteristics (material, shaft, appearance of the tip) and according to their function.
material
Organic – wood, horn, bone, tooth material.
Inorganic – flint, obsidian, various metals such as bronze, iron or steel.
Stocking
No shafting – the material of the arrow's tip and shaft are identical because they are made from a single piece, e.g., blowgun arrows made from split bamboo or palm leaf midribs, etc. Alternatively, the tip is glued or tied directly into a gap in the arrow shaft.
Tang or tang – At the rear end, the arrowhead tapers to a narrow, flat strip, the flat tang or tang, which is inserted into a slit sawn into the arrow shaft and glued and/or tied into place, e.g., flatheads and many European flintheads.
Tang, plug, or spike – At the rear end, the arrowhead tapers to a thin, usually conical, square pin, the spike, plug, or spike, which is inserted into the hollow of a tubular shaft or a drilled hole in a wooden shaft, e.g., most Asian arrowheads (bamboo arrows). Some modern arrowheads have a screw tang, which has a screw thread and is screwed into the arrow shaft, which has an internal thread.
Sleeve tip – At the rear end, the arrowhead tapers into a conical sleeve, which is inserted (or possibly glued) onto the arrow shaft. This is only possible with metal arrowheads, such as medieval arrowheads and crossbow bolts, as well as Roman catapult bolts. The sleeves remain open on one side, which enables their clamping effect on the arrow shaft.
Wingless form
The tip tapers to a needle point at the front, and its cross-section is round, triangular, square, or octagonal. The round cross-section is commonly referred to today as a "target point" by archers to minimize damage to targets. The triangular or square cross-section is called a bodkin . It penetrates sheet metal, which is why it was once used against armored targets. Examples include the medieval English bodkin point, many crossbow bolts, and the most common shape of Roman catapult arrows.
Leaf tip, winged shape
The most well-known arrowhead shape tapers to a triangular point at the front. The razor-sharp blades on the outer edges are called wings, and the tip itself is called a leaf. They were and are most commonly used as hunting and war arrowheads. Their function is that the sharpened wings cut a wide channel through the victim's body when they penetrate prey or enemy, similar to a sword thrust, which usually kills the victim. The winged arrowhead usually has just two sharp wings like a small spearhead, but there are also three- and four-winged arrowheads, which are 30% and 50% more effective, respectively. With leaf arrowheads, a further distinction can be made between the three ways in which the wings merge into the shaft; this transition is called the base of the arrow . If the wings end suddenly at the base of the arrow and their trailing edge is at a 90° angle to the shaft, the arrow is called a straight base . If the ends of the wings are pointed (barbs), the arrowhead is referred to as a retracted base . If the wings taper gradually back toward the shaft, this is called a flattened base or a downturned base .
Cross cutter
A special type of leaf arrowhead is the cross-cutter. These usually have two points instead of one, with the area between them sharpened. They usually have a crescent- or Y-shaped forked blade; more rarely, the cutting edge is straight and the blade is shaped like an axe head. Cross-cutters also have three- and four-bladed forms, for example, in ancient China.
Blunt tips
There are different shapes of blunt points. Blunts usually have a flattened head, while judo points have additional claws on the sides. Howling points usually have a rounded head.
Multipurpose arrowheads – MP stands for MultiPurpose, a name derived from the general purpose. These shapes, used from the 11th to the 15th centuries, were also commonly used in both warfare and hunting; they are characterized by a hollow sleeve at the tip itself that could accommodate the wooden arrow shaft, making the arrow more stable and aerodynamic.
War arrowheads
These forms, used from the 10th to the 15th centuries, are compact, appear to have been used primarily for war purposes, and are also characterized by a sleeve for the arrow shaft. Some are designed to penetrate protective armor particularly well.
